Big Power Engine Parts | Design, Manufacturing & Selection.

Aftermarket parts including crankshafts, pistons, rods, engine blocks and more—we all use them—but what goes into deciding what is made and what material is used to ensure you are really getting something better than OEM, and how do you know if you need such an upgrade?

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Christian from Nitto Performance Engineering gives us some insight into these topics and more, with examples including high-volume SR20 oil pumps, RB32 Torrington bearing upgrades, and ACL custom bearings, as well as how 3D printing is used for research and development.

The difference between Sine Drive and Flat Drive oil pumps is also covered, as well as some of the power levels that see engine builders move from OEM to aftermarket parts and materials, including 4340, EN40B and EN26.

Imagine if Formula 1 got rid of most of its rules and regulations — how fast could they go? The freedom to design and build whatever will result in the fastest time is a dream for many in the higher levels of motorsport, but for British hillclimb champion Alex Summers, it’s a reality.

Use ALEX100 to get $100 OFF HPA’s Track Day Package: https://hpcdmy.co/trackdayb

There have been a lot of great families in motorsport over the years — the Earnhardts, the McRaes, the Andrettis — but when it comes to the prestigious world of British hillclimbing, one surname is better recognised than most — the Summers. This week’s guest, Alex Summers, comes from legendary hillclimbing stock, with his grandfather, father, and mother all committed participants of the sport at the highest levels. That Alex is a British hillclimb champion and three-time runner-up isn’t much of a surprise with that kind of family history.

In this episode, we first cover Alex’s early days in racing, as well as his schooling and engineering education. Starting out working for McLaren during a university placement, Alex then moved to Aston Martin, where he’s been for the last decade. During all that time, he’s never stopped racing.

This leads us to his current weapon of choice, the ‘P4t’. This absolute rocketship was designed, engineered, and built by Alex himself. It weighs 500kg and runs a 700hp, 16,000rpm Cosworth IndyCar V8, resulting in one of the fastest cars on the generally very short venues that make up the British hillclimb championship season. Unlike many overseas competitions, Britain doesn’t have much in the way of elevation, meaning runs generally last well under a minute.

This form of very short and sharp racing is described as “drag racing with corners” by Alex, and this, along with very few regulations, makes for some very unique requirements when building a competitive car. We dig deep into the P4t build, asking the big questions about the engine, chassis, and suspension setup.

Alex is also known for his involvement with the McMurtry Spéirling development team, and was one of the first drivers to test the insanely fast 1000hp fan car. We find out what a car as fast and unique as the Spéirling and its 2000kg of downforce is actually like to drive and what it takes to get record-setting runs out of it.

Follow Alex here:
IG: @alex_summers_hillclimb
YT: Alex Summers
TK: @alex.summers.hillclimb

Don’t forget, you can use ALEX100 to get $100 OFF HPA’s Track Day Package: https://hpcdmy.co/trackdayb

Timestamps:
3:47 How did you develop an interest in cars?
6:27 How much time do you need to spend in a kart to be really good?
11:57 Seriousness of the British Hill Climb Championship
18:42 What’s your formal education?
26:39 Opportunities in the UK for high-end motorsport
31:29 Australian V8 Supercars and British touring cars
34:34 What happened after you finished your degree?
40:20 How do you mentally switch on for a hill climb run?
47:55 How do you improve at hill climb when track and car time is limited?
59:44 What are these hill climb cars based off?
1:02:28 Would a British hill climb car be competitive at Pikes Peak?
1:05:36 Pros and cons of turbocharging in these cars, different engine combinations
1:12:57 How do you set up suspension with your aero package for hill climb?
1:18:13 What is a heave spring and how does it work?
1:21:05 How and why the carbon monocoque?
1:35:10 How did you get involved with the McMurtry team?
1:41:08 How do you guess as a driver the level of grip available from

1200hp is nothing to sneeze at in a full-fat RB-powered Nissan R32 GT-R 'Godzilla', but it's outright wild in an SR20-powered 4wd Nissan pulsar GTi-R running 45 psi of boost! With the naming convention so close is this car worthy of the title 'Mini Godzilla?'

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Owner Akin Uykun gave us some insight into this build, which features a lot of great work from the PowerTune team, including their adaptor kit that allows the use of a Holinger sequential designed for the Mitsubishi EVO platform.

Running a MoTeC electronics package, the SR20 has a VE head, and some of the issues with the DE/DET heads at this level are discussed along with the cylinder head sealing the dry deck Bullet Engineering billet block utilises. The difference between a dry vs wet block is also explained, along with some insight into the fuel setup.

A high performance Precision 72-75 turbocharger is used to make the bulk of the 1200hp, but nitrous is also use lower in the rev range to help with spooling and up top to add the last 200hp to the peak output.

Without a doubt, this is one of the fastest Pulars in Australia if not THE fastest, and if Akin manages to hit the low 8's in the future, a world record could even be possible, but he's not quite there yet.

Braking at 3g = approximately -105kph (-65mph) in 1 second.

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Meet the RP968: A 1500hp capable beast that shattered the Sydney Motorsport Park lap record with a blistering 1:17.860, dominating WTAC for four straight years in the EMtron Pro class.

It takes the full package to smash an outright lap record, and that's what the RP968 has done with teams of clever people like Ashley Field of 909 Motorsport behind the scenes and Barton Mawer behind the wheel. Despite running a large capacity 4-cylinder engine and a 1500hp+ capable Thor billet block from Elmer Racing, amongst other performance goodies, the Bosch Motorsport ABS system that is there to reduce speed, not increase it, has been a key player in getting the lap times as low as possible on the day.

With a switch from the M4 to the M5 unit and more fine-tuning of brake pad compounds and spring rates, the team has gone from seeing 2g under braking to 3g, giving everything on and in the car (especially the driver) a huge workout.

To reach this level of performance takes more than just slapping on a 'big brake kit' and calling it good, however, and Ashley discusses some of the considerations that go into a high downforce car when it comes to trying to have braking performance at both high and low speed without bouncing or loss of traction.

Embarking on a big build with limited experience can be a disaster as the builder quickly finds themselves out of their depth — and while this scratch-built, tube-frame Pontiac Firebird Trans Am project wasn’t without its bumps in the road, builder Riley Stair has pulled it off incredibly well and learned a whole lot in the process.

Use “RILEY100” to get $100 Off HPA’s Fabrication Starter Package: https://hpcdmy.co/fabpackageb

Riley Stair had a unique journey towards cars. Before picking up a TIG torch or heading anywhere near a race circuit, he spent his days honing his craft as a professional BMX racer.

It was only after one too many injuries on the bike that Riley decided it was time to stop racing and start building serious cars. Instead of following the usual route and enrolling in a trade school, he decided to dive in with both feet and build a vicious track car from scratch in what just might be the boldest hands-on learning exercise we’ve ever seen.

We start this episode by following Riley’s path towards starting his own business, RS Motorsport, and delve into his reasoning behind learning everything by doing. Riley came out the other side of this process as a great welder, fabricator, and builder of very cool cars. He also has a super-high-quality 1000hp, 10,000rpm, tube-frame Pontiac to show for it.

This conversation dives deep into a host of motorsport fabrication topics, discussing everything from TIG welding tips and tricks, to choosing the right material for your project, designing and building a tube frame chassis, and much more.

We also dig into the 1970 Firebird Trans Am build in detail, covering why Riley wanted to keep it NA, how he designed the pushrod suspension system and the mistakes that needed to happen so he could learn and improve.

As a one-man-band outfit, RS Motorsport has its limitations and challenges — so to finish up, Riley discusses the business side of the equation, talking about the hidden headaches of setting up and running a company offering services that are very much in demand.

Watch the interview with Carl Thompson here: https://youtu.be/9TIrPvG7iHM?si=Q75nyYJi5PC_r_EO

Follow Riley here:
IG: @riley_rsmotorsport
YT: RS Motorsport
WWW: rsmotorsportusa.com

Don’t forget, you can use “RILEY100” to get $100 Off HPA’s Fabrication Starter Package: https://hpcdmy.co/fabpackageb

Timestamps:
4:07 How did you develop an interest in cars?
6:41 What drew you towards road racing over drag racing?
9:09 Do you have any formal qualifications that relate to your business?
13:50 How did you learn to TIG weld?
16:23 Welding process for reactive metals, shielding gas
23:47 Accurate fit up when TIG welding
25:35 Materials for turbo manifolds pros and cons?
32:47 Using off-the-shelf merge collectors vs hand fabricating
34:31 Gas lenses and cups, what are they and how do they work?
40:12 What are the challenges with aluminium welding?
56:11 Pontiac Firebird build
1:11:11 How did you plan out the tube chassis?
1:17:05 Pushrod suspension
1:18:49 Why NA? And why the aim for 1000HP?
1:24:19 8 into 1 headers
1:27:42 What ECU is the Firebird running?
1:28:08 What happened when you got the car to the track?
133:58 What changes have been made since you got the car on track?
1:40:42 Challenges with RS Motorsport business
1:56:36 Are you using any 3D scanning or CAD in your fab work?
2:02:25 Final 3 questions

Don't waste time shifting gears.

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

The 1000hp capable Honda K24 in Mike Burroughs Stanceworks 244 GTK Ferrari build is useless without the ability to put power to the ground, and Scott Hilzinger of Haltech explains how the Haltech electronics system handles this via a Quaife 5-speed dog engagement gearbox.

This setup utilises a load cell gear knob and shift position sensor as well as other sensors on the car to give data on if the gear changing is optimal when it comes to keeping the car balanced and as fast as possible, with INCREASED reliability over manual gear shifts.

Also, why are 'pops and bangs' bad for an engine, and what can a tuner do to help avoid them to give some mechanical sympathy?

Driving talent only gets you so far in professional motorsport — if you want to make it, you’ll need the full package… Plus a healthy dose of luck.

In this episode, professional driver Billy Johnson gives us his thoughts on the challenges of turning driving into a job, the best way to spend 10k as a track newbie, why the Skyline GT-R is seriously overrated, the less glamorous realities of 24-hour racing, and much more.

Use “BILLY50” to get $50 off HPA’s Race Driving Fundamentals course: https://hpcdmy.co/raceb

Billy Johnson is a professional driving coach, race driver, and factory development driver who has had a long career in the game despite his young age.

We start by discussing the path Billy took to be able to drive for a living full-time, despite not coming from a motorsport family. Predictably, this involves a deep dive into karts and his progression through the ranks towards working for Ford developing the GT, GT350, and GT500.

Billy has also raced for Ford in the 24 Hours of Le Mans and NASCAR, as well as many other prestigious competitions all over the globe, meaning he’s able to give some great insight into what it takes to drive these gruelling competitions and the extremely long stints they sometimes demand.

This discussion provides a fascinating insight into the cutthroat world of motorsport at the higher levels, giving us a much better idea of what it takes to rise above all the other equally talented drivers out there gunning for the same seat.

The conversation also covers the cars themselves. With Billy’s experience behind the wheel of extremely rapid time-attack Honda NSXs, we have to ask him what makes this 90s icon so good, and, in his opinion, why it's so superior to another popular time attack weapon — the Skyline GT-R.

With some interesting discussion around motorsport-level driving aids, simulators, and the best beginner track car for under 10 and 50k (is Miata always the answer?), this episode is packed with great info!

Follow Billy here:
IG: @billyjracing
FB: Billy J Racing
X: @billyjracing
LI: Billy Johnson
WWW: billyjohnsonracing.com

Don’t forget, you can use “BILLY50” to get $50 off HPA’s Race Driving Fundamentals course: https://hpcdmy.co/raceb

Timestamps:
4:04 How did you develop an interest in cars?
13:38 Having an understanding of engineering as a driver
18:49 Why are karts a normal stepping stone into a motorsport career?
20:28 What is race craft?
31:18 What is it that makes time attack an interesting form of racing?
39:24 Difficulties of going from one warm-up lap to a flying lap in time attack?
44:21 What do I do to improve my lap times?
54:28 Time Attack NSX and its handling
1:07:14 Engine package in the NSX
1:09:08 Oil starvation and dry sumps
1:15:53 NSX aero package
1:18:18 Driver aids
1:32:40 24-hour endurance racing, physical and mental fitness
1:37:13 Tyre management over a long stint
1:44:29 Tips for novice drivers taking their car to the track
1:50:41 Does sim driving improve driver skills?
1:56:32 What is a good entry-level track car?
2:03:29 Final three questions

Why an RB26 is better than a 2JZ and vice versa is a common discussion between many 6 cylinder fans and while the 2JZ might have the edge when it comes to OEM components on lightly modified street builds, the RB hasn't been pushed or developed as far as the 2jz yet to see how things compare at the other end of the scale…

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

Since filming the team has run a PB of 6.35 @ 222mph to set a new RB-Powered world record.

Dom from Tony Rigoli Performance runs us through some of the 12,000rpm spinning Nissan 350z build which uses a ‘tickled’ RB26 pushing out 2140HP (Mainline Dyno) at the hubs...for now. The plan is to fit a larger Garrett G57 turbocharger and GFB wastegates to push for 2300-2400HP in the quest to hit the 5’s with this full tube chassis car that runs an EMtron KV16 ECU, M&W CDI system, Rams cylinder head, Plazmaman inlet manifold, a Liberty Gears 5 speed, EZ Motorsports clutch, Spool crankshaft, Supertech valvetrain and in-house TRP pistons, rods and cam grinding.

Also discussed via this Sydney Jamboree interview is the switch from the old Nissan 300zx ¾ tube chassis to their new 350z full tune chassis, the difference between them and some of the advantages a full tube chassis allows the team. The clutch setup is also discussed as being something constantly being reset and adjusted, as well as up to this power level how bearings are the only major part that is checked regularly to ensure reliability.

As the event was rained off we didn't manage to get any in-car, but we'll be back.